It’s very upsetting if you can’t get your Tablet to power on. Looking at the blank screen, the only thought is how to get it fixed.
Often, it’s only a minor technical glitch that can be solved in minutes. Try the following seven useful tips that can bring back the Tablet to life.
If nothing works, you always have an alternative using this service as a cost-effective solution.
Steps to Follow
- Check Cables and Charging Ports
- Perform a Power Cycle Reset on Your Phone
- Check the Battery of Your Device
- Identify Problems with the Screen
- Get help from Your Computer
- Perform a Factory Reset
- Use Data Extraction Tools
Check Cables and Charging Ports
Computer accessories and small parts are prone to malfunctions and errors. For instance, a problematic charger cable can make you think that there is something wrong with the Tablet.
Accordingly, the first step is to check the charger and the charging cable as faulty cables can lead to a loss in power causing the blank screen.
Dirt and dust particles in the USB ports or power outlets can also block the current passing through the device. Therefore, try to remove any dust particles using a can of compressed air, which should also remove any doubts regarding faulty charging ports.
Perform a Power Cycle Reset on Your Phone
It’s well-known that your device can become unresponsive if they go in a frozen state. In fact, the device can also freeze when it’s powered off.
In the frozen state, nothing works as the screen and buttons are completely unresponsive.
Anyone can easily fix the issue by removing the battery inside a tablet. Wait for a few seconds, and then re-insert the battery to solve the potential problem.
As most tablets have an in-built battery, you can perform a soft-reset to fix most issues. Just hold the power button anywhere from 5 seconds to 15 seconds, depending on the phone, before releasing it. Sometimes, the soft-reset is able to activate an unresponsive device.
Check the Battery of Your Device
When used properly, most modern tablets can survive for many years, but you can’t hope that the accompanying original battery will survive that long.
If you can get access to the main screen, check if the battery is charging normally. If the battery icon doesn’t pop up, it means that there is a potential problem with the battery.
On the other hand, if you get a blank screen or there are issues with starting the computer, try plugging in your computer for approximately 30 minutes to see if your tablet gives any indication of a battery recharge. If there is no sign of charging, battery discharge is confirmed.
Most modern Tablets have an in-built battery. Removing a battery can void the warranty; therefore, it’s better to take your phone to a dealer if your warranty is still intact.
Identify Problems with the Screen
It’s not uncommon for the tablet screen to fail. When the screen doesn’t work, we blame the tablet without realizing that it’s the screen that needs to be fixed.
Such warning signs occur when there are no visible problems with the battery or the computing system. If your battery is charging and the tablet seems to power up to a black screen, screen problems cannot be ruled out.
Due to system errors, sometimes it takes a couple of minutes to upload the screen. Once powered up, wait for at least two to five minutes for the boot process to kick in.
Your Computer can also help restart an Android Tablet
According to experts, connecting your Android tablet with your computer performs a similar function to a soft-reset, which can help get the data without resorting to advanced stages.
First, connect your tablet to the computer using a USB cable, and let the tablet charge for about 15 minutes.
After approximately 15 minutes, disconnect the cable from your tablet for 10 seconds before reconnecting. Just make sure that you do not disconnect the end of the cable that is connected to the computer.
After reconnecting the cable to the tablet, allow another 30 minutes for your device to recharge. After 30 seconds, and without disconnecting the cable from the phone or the computer, press the power button for five seconds.
Now, you should see the restart option on the screen, which is a positive sign of recovery. If you don’t see the restart option, hold the power button for another 30 seconds for the screen to appear.
Use the Factory Data Reset Option as a Last Resort
When everything fails, it’s time to reset the tablet to its original condition. Hard-Reset means that the tablet will erase any data in it by going back to its original state when you bought it. It may not be the best option, but it’s better than buying a brand new tablet.
To boot the device, hold the power and volume buttons until you get a system logo. Select the recovery option by using the volume button to go up and down the menu selection. Press the power button to select the factory reset option.
The button configuration for hard-reset can often differ, depending on the brand. For help, you can always go on the Internet to find the hard-reset configuration for your system.
Use Data Extraction Tools to Save Your Data
While hard-reset is a great option, it may not suit everyone because you will lose your data in the process. Luckily, there are certain online toolkits that can retrieve your data from phones that are frozen or locked. These tools can even retrieve data from broken and damaged devices, if applicable.
If you’ve made up your mind to do a factory reset, it makes sense to save the data to your computer using recovery tools.
Remember, you don’t need to panic if you ever face the dreaded blank screen. Keep calm, and try using these tricks as they are known to offer a quick-fix solution to the problem.
If nothing works, your only option is to take the Tablet to an expert who can help recover the system.